White Round Closet Rod End Brackets (Rear Pin – 5mm) | 32mm | Desunia

Designed for system holes—simple, secure, and easy to reposition.
These rear pin brackets are built specifically for our 32mm round rods and are made to work with cabinets, closets, and shelving systems that have rows of pre-drilled 5mm holes that are spaced at 32mm (1 1/4"+-) increments.

If you’re working with prefab closet panels or wardrobe systems, these are designed to drop right in. Adjusting the rod height later is just as easy—simply move the supports to a new set of holes.

What sets ours apart are the rear pins themselves. Our exclusive design features four tapered ridges that bite into the wood as they’re inserted, creating a tight, stable fit without looseness or rattle. It’s a small detail—but one that makes a big difference in how solid everything feels.

In most cases, this is a fastener-free installation. For added flexibility, we include a screw with each support—just in case your holes are slightly oversized or if you’re drilling your own 5mm holes by hand.

A round option—where oval is the norm.
Most rear pin systems are built around oval rods, leaving few options if you prefer a round profile.

These brackets are designed to give you that option—so you can use a round rod while still taking advantage of an adjustable panel system. Pair them with our 32mm round rod (sold separately) and you have a complete setup that’s ready to go.

Cast metal construction—not stamped or plastic.
These brackets are formed from molten metal using a precision mold—not stamped out of thin sheet metal, or even worse…plastic.

The result is a thicker, more substantial part with smoother edges, better durability, and a more refined overall look. The embossed Desunia logo is built right into the face—a clear mark of our design.

Each bracket includes a set screw that locks the rod in place and prevents it from shifting. To keep the installation neat, install each bracket so the set screw faces the rear.

A finish that actually holds up.
A great white finish starts with a properly prepared surface.

Before coating, we take the extra step to smooth and refine each bracket to create a consistent base. Then a durable powder coat is applied and cured—creating a tougher, more uniform finish than typical spray-applied paints.

The result is a crisp, even white that resists chipping, scratching, and everyday wear—and matches our rods and other components so everything looks like it belongs together.

Here’s what you get…

• 2 white round rear pin closet rod end brackets
• 2 screws (for optional reinforcement)
• Hex wrench for set screw