Satin Nickel Oval Closet Rod Mid Hanger | 15mm x 30mm | Desunia
OCH-17001-SN
Out the door in a flash!
Who wants free shipping?
Hassle-free returns
+ 30 Day return window
+ No restocking fees... ever
+ No problem if the product has been opened
The support you need—right where you need it.
Mid hangers are designed to provide additional support for longer spans, helping prevent sag and keeping everything straight and solid over time.
Let’s take a look at what kind of sag you can expect with our oval rods. We tested them under real-world conditions—here are the results.
Solid cast construction—not stamped shortcuts.
These are cast as a single piece—not assembled from multiple parts like some lower-cost alternatives.
Casting creates a denser, more substantial part with cleaner lines and smoother edges. The Desunia logo is embossed directly into the hanger, so you know you’re getting the real thing—not a generic lookalike.
Designed to work as part of a complete system.
These mid hangers are made to pair perfectly with our oval end brackets—same profile, same dimensions, same clean, modern look.
The result is a consistent, well-integrated installation from end to end, without mismatched components or awkward transitions.
A smoother finish starts before the finish.
A great satin nickel finish starts with a properly prepared surface.
Long before it gets plated, each hanger goes through a multi-step grinding and polishing process to refine the surface and remove any burrs or rough edges. This essential step sets the stage for everything that follows.
After a generous nickel plating, the satin effect is applied entirely by hand. Using a specialized abrasive wheel, each piece is carefully finished to achieve a soft, uniform, brushed appearance—while also serving as a final check for consistency.
The result is a warm, understated finish that complements a wide range of interiors—and matches seamlessly with our rods and other components for a cohesive look throughout your space.
Installation with wall brackets.
Mid hangers are designed to provide additional support for longer spans, helping prevent sag and keeping everything straight and solid over time.
Let’s take a look at what kind of sag you can expect with our oval rods. We tested them under real-world conditions—here are the results.
- 4' span → 63 lbs → 1/8" sag
- 5' span → 79 lbs → 3/8" sag
- 6' span → 95 lbs → 13/16" sag
Solid cast construction—not stamped shortcuts.
These are cast as a single piece—not assembled from multiple parts like some lower-cost alternatives.
Casting creates a denser, more substantial part with cleaner lines and smoother edges. The Desunia logo is embossed directly into the hanger, so you know you’re getting the real thing—not a generic lookalike.
Designed to work as part of a complete system.
These mid hangers are made to pair perfectly with our oval end brackets—same profile, same dimensions, same clean, modern look.
The result is a consistent, well-integrated installation from end to end, without mismatched components or awkward transitions.
A smoother finish starts before the finish.
A great satin nickel finish starts with a properly prepared surface.
Long before it gets plated, each hanger goes through a multi-step grinding and polishing process to refine the surface and remove any burrs or rough edges. This essential step sets the stage for everything that follows.
After a generous nickel plating, the satin effect is applied entirely by hand. Using a specialized abrasive wheel, each piece is carefully finished to achieve a soft, uniform, brushed appearance—while also serving as a final check for consistency.
The result is a warm, understated finish that complements a wide range of interiors—and matches seamlessly with our rods and other components for a cohesive look throughout your space.
Installation with wall brackets.
- Install both wall brackets first, mounting them the same distance below the shelf as the mid support
- Slide the mid hanger onto the rod
- Install the rod onto the end brackets (you may need to flex it slightly)
- Slide the mid hanger into position and secure it with the provided screws
- Install the first end bracket
- Slide the mid hanger onto the rod
- Place the second end bracket onto the rod and install it
- Slide the mid hanger into position and secure it with the provided screws
- 1 satin nickel oval closet rod mid hanger
- Matching mounting screws (two lengths: 3/4" and 1 3/16" for thicker surfaces)
No reviews found
Mid Hanger Installation & Support Guidelines
Do I really need a mid hanger?
How many mid hangers should I use?
If I’m going to use a mid hanger, does that affect the location of the wall brackets?
Will the mid hanger match my end brackets?
About the finish - Satin Nickel
Will the satin nickel finish hold up over time?
How do I clean the satin nickel finish?
Shipping & returns
How quickly will my order ship?
What does shipping cost?
Are your products returnable?
Who pays for return shipping?
What if I need some help deciding?
Please sign in so that we can notify you about a reply