Satin Nickel Oval Closet Rod End Bracket (Top Mount) | 15mm x 30mm | Desunia

Designed for spaces where wall-mounted brackets won’t work.
These top mount brackets are designed specifically for oval closet rods and install directly into the underside of any shelf or horizontal surface.

Because the rod mounts from below, it works in places where wall-mounted brackets simply won’t—like cabinets, built-ins, shelving systems, laundry rooms, or closets without solid side walls. If you have a horizontal surface, you can have a strong and flexible hanging solution.

The ideal solution for open-ended layouts.
Top mount brackets are especially useful when one side of the rod needs to remain open—such as at the end of a closet run.

Designed to work as a complete system.
For spans over 4 feet, a mid support is often called for. Our mid supports are designed to work seamlessly with these brackets—same profile, same dimensions, same clean look.

The result is a consistent, well-integrated installation from end to end.

Solid cast construction—not stamped shortcuts.
These are cast as a single piece—not assembled from multiple parts like many lower-cost alternatives.

Casting creates a denser, more substantial part with cleaner lines and smoother edges. The Desunia logo is embossed directly into the top of each bracket, so you know you’re getting the real thing—not a generic lookalike.

A smoother finish starts before the finish.
A great satin nickel finish starts with a properly prepared surface.

Long before it gets plated, each bracket goes through a multi-step grinding and polishing process to refine the surface and remove any burrs or rough edges. This essential step sets the stage for everything that follows.

After a generous nickel plating, the satin effect is applied entirely by hand. Using a specialized abrasive wheel, each piece is carefully finished to achieve a soft, uniform, brushed appearance—while also serving as a final check for consistency.

The result is a warm, understated finish that complements a wide range of interiors—and matches seamlessly with our rods and other components for a cohesive look throughout your space.

Not just for closets.
These brackets can also be used for curtain rods or other hanging applications—anywhere you have a solid surface above and want a clean, secure installation.

Simple installation.

• Predrill one of the two holes
• Install the bracket and leave the screw slightly loose
• Rotate the bracket as needed to square it with the surface
• Predrill and install the second screw
• Slip the rod into place, and repeat for the other end

Here’s what you get…

• 1 satin nickel top mount bracket (sold individually)
• Matching mounting screws (two lengths: 3/4" and 1 3/16" for thicker shelves)