Custom Cut Satin Nickel Oval Closet Rod | Desunia

• If you’re ordering a custom rod only, give us the exact length you want

• If you’re ordering a custom rod with top-mount brackets, give us the bracket-to-bracket size

• If you’re ordering a custom rod with rear-pin or screw-on brackets, give us the full closet opening. Walls are rarely perfectly straight, so measure exactly where the rod will sit. We account for bracket thickness so everything fits the way it should.

You’ll end up with about 1/16" of total play (1/32" per side).

If you’re unsure of your measurements, it’s safer to err slightly smaller. A rod that’s too long won’t fit.

Our water-cooled industrial band saw makes a straight, square cut every time. We then deburr both the inside and outside by hand.

What you get is a rod that’s ready to install—no cleanup needed.

Fair question—but what’s your time worth?

Even assuming your cut is square, between measuring, cutting, and cleaning up the edges, it adds up quickly. We handle the hard part so you get a clean, accurate result without giving up your weekend.

30mm x 15mm, which is just slightly under 1-3/16" x 5/8". The side wall is a robust 1mm thick, giving the rod a solid feel and excellent strength.

We tested these under real-world conditions:

• 4' span → 63 lbs → 1/8" sag
• 5' span → 79 lbs → 3/8" sag
• 6' span → 95 lbs → 13/16" sag

These reflect real-world closet use—not theoretical limits.

Not in most cases. Up to about 4 feet, these rods are very solid.

Around 4½ feet, you may start to see some visible sag under heavier loads. If you're planning to load it up at longer spans, adding a center support is a good idea.

Oval rods offer a different look than round rods and are often considered to have a more modern, streamlined feel.

Because of their shape, they will flex a bit more under load than a round rod. However, in most standard closet applications, they perform very well.

If you're planning a longer span or heavier load, adding a center support will eliminate most deflection and give you a very solid setup.

Yes. Before plating, we smooth and refine the steel surface so the nickel has a clean, consistent base to adhere to.

After plating, each piece is hand-rubbed to achieve a uniform satin finish.

The rod requires very little maintenance, but if needed, use a soft cloth with mild soap and water.

Avoid abrasive cleaners—they’re not necessary and can affect the finish over time.

Most orders ship the same day if placed before noon.

You’ll receive a tracking number as soon as your order goes out.

• $2.99 → Orders under 1 lb

• $9.99 → Orders over 1 lb and under $99 in value
• FREE → Orders over $99

Custom-cut products are non-returnable, so please measure carefully.

All other products (excluding closeouts marked as final sale) can be returned within 30 days.

If we made a mistake with your order, we’ll cover the return shipping.

In all other cases, the customer is responsible for return shipping.

If you have any questions at all, a friendly voice is waiting for you at (631) 268-4000. We’re happy to help before you place your order.