CUSTOM CUT! | Satin Nickel Oval Closet Rod w/ "Rear-Pin" Support Brackets

Help Has Arrived!!!!
Upgrading your closet is supposed to be easy, except for the dreaded chore of cutting the rod to length because it's a HUGE HEADACHE.
- The slipping hacksaw blade
- The crooked cuts
- The jagged edges...
Arrrrg!
Well, the good news is those days are over, and your life just got 10X easier. We got this!

Easy-Peezy Ordering
Just click the "Customize Now" button and enter the size you need (to the nearest 1/16"). We'll take care of deducting for the thickness of the end cups.

Strength You Can Count On!
Don't be fooled by other choices that may appear to be the same, because all rods are not created equal! Ours is a robust 22-gauge, far thicker than most others. The oval shape really resists bending!

Fantastic Finish
Why settle for chrome when you can have something MUCH nicer? The heavier steel that goes into our closet poles is the perfect foundation for a fantastic finish. Some manufacturers plate their goods as soon as they leave the steel mill. Not us! We make our rods and brackets "smooth as a baby's bottom" first, and THEN apply a generous nickel plating! At that point, each component is buffed with an abrasive wheel for a satiny smooth final finish. This last operation is done entirely by hand BTW.

"System" End Supports
The 2 provided end supports have 5mm pins that project out the back. These are specifically made for cabinets that have "system holes" drilled at 32mm increments. This includes most prefabbed cabinets.

Installation is Easy as 1,2,3
Step 1 - Insert the end cups into your pre-drilled holes
Step 2 - Drop in the pre-cut rod
Step 3 -
Well, actually, there is no 3rd step. You're already done ("Easy as 1,2" didn't really have the proper ring to it). OK, if you realllllly want to go overboard, we do include a set screw for extra security, but honestly, it's not really necessary.

Non-Returnable
Please understand that since this is a custom product and is non-returnable, so PLEASE... measure with care!

Here's what you get...
- 1 custom-cut satin nickel oval rod up to 36".
- 2 satin nickel end supports with "rear pins".
- 2 short set screws for extra (optional) security.