Chrome Oval Closet Rod End Brackets (Screw-On) | 15mm x 30mm | Desunia

Your go-to choice for a clean, secure wall installation.
When mounting an oval closet rod directly onto drywall, wood, or any solid surface, this is the bracket you want. Simple, solid, and designed to hold everything exactly where it should be.

It’s the kind of detail you’ll see and use every day—so it’s worth getting right from the start.

Designed to fit—and stay put.
Not all brackets are created equal. Many are shallow, which can leave the rod feeling loose or prone to shifting. If you’ve ever had a rod that rattles or shifts, there’s a good chance the bracket was the problem.

Ours are intentionally made deeper, giving the rod a more secure seat inside the bracket. That added depth also gives you a little forgiveness during installation—if your rod is cut slightly short, there’s still plenty inside the bracket to keep it secure.

Solid cast construction—not stamped shortcuts.
These are made from cast zinc—not thin stamped metal that’s cranked out by the thousands.

Casting creates a denser, more substantial part with cleaner lines and smoother edges. Each bracket is embossed with our Desunia “D”, so you know you’re getting the real thing—not a generic lookalike. You can feel it the moment you pick one up, and you’ll appreciate it even more once it’s installed.

Whether it’s a few garments in the laundry room or a fully loaded coat closet, these brackets provide a dependable, confidence-inspiring foundation.

A smoother finish starts before the finish.
Chrome can be unforgiving—any imperfection underneath will show.

That’s why we take the extra step to smooth and refine each bracket before plating. The result is a cleaner, more consistent chrome finish that looks sharp and holds up to daily use.

Everything you need (no hardware store run required).
We include the right fasteners for multiple installation scenarios:

• Short screws for mounting into 3/4" panels
• Longer screws and hollow wall anchors for drywall installations

No guessing, no last-minute trips—just open the package and get to work.

Installation (quick and straightforward).
If going into wood:

• Install the top screw first
• Straighten the bracket if needed
• Install the second screw

If going into drywall:

• Use the bracket as a jig and drill two 3/16" holes
• Tap the wall anchors in until they’re flush with the drywall
• Start screws with a drill if you’d like, but finish by hand to avoid overtightening

For spans over about 4 feet, a mid support is often a good idea depending on the load.

Here’s what you get…

• 1 pair of oval closet rod end brackets
• Mounting screws (2 lengths)
• Hollow wall anchors