Black End Brackets | Screw-On Type | 15mm x 30mm Oval Closet Rod | 1 Pair

Desunia... The Closet Professionals!
These oval rod end supports are the finest quality you'll ever find... bar none! If you're outfitting a new closet, you'll be glad to know that these are the perfect companions to our oval rods. But they're just as suitable if you aim to replace the old end supports in your existing closet with something much nicer. Your closet never had it so good!

Amazing Finish
Every surface (even the ones you won't see after installation) is then finished with a super durable black powder-coated finish. BWT, this is the same finish that we use for Desunia closet rods and end supports, so you can rest assured that all components of your newly designed closet will match beautifully!

"System Holes" Installation
These end supports have two 5mm rear-facing prongs that are 32mm apart. So if you have a closet system with rows of pre-drilled 5mm holes, you're in luck, because installation can literally be done in about 10 seconds, without any tools. Just pop them in at the desired height, put the oval rod in place, and you're done! Of course, this assumes the rod is cut pretty precisely, as it serves to keep the end cups in place. If the rod is a little short, or you'd just like a little more security, add the provided 3/4" screws for good measure.

"Old School" Installation
If you don't have a closet with pre-drilled holes and just want to use our supports in a more conventional fashion, you can do that as well. The "dimples" that project out of the 5mm pins can be used to mark the hole locations on your wood cleating. Then install the rod, admire your good work, and start hanging clothes!

Here's what you get...
- 1 pair of matte black oval rod end supports with rear-facing 5mm pins (enough to mount 1 rod)
- matching 3/4" mounting screws