Black Mid Bracket for 15mm x 30mm Oval Closet Rod

Desunia... The Closet Professionals!
As robust as our closet rods are, if you have an extra-wide span and/or some especially heavy coats to hang, you might need a little more support.

Real Steel
This little work of art is cast as 1 piece from a mold, so there are no seams/joints that can create weak points. After cooling, it goes through a multi-step grinding/polishing process to remove any burrs or imperfections. We take as much time as needed during this phase, because it really sets the stage for the final finishing process.

Amazing Finish
Every surface (even the ones you won't see after installation) is then finished with a super durable black powder-coated finish. BWT, this is the same finish that we use for Desunia closet rods and end supports, so you can rest assured that all components of your newly designed closet will match beautifully!

Choice of Screws
We go the extra mile by providing you with 2 different lengths of screws. When going into a standard 3/4" shelf, use the shorter screws, but if the overhead shelf is thicker, break out the big guns for even more holding power!

Matching End Hangers
If one or both ends of your rod need to be hung from above, check out our end hangers (sold separately). They have the same exact styling and dimensions as our mid-hangers for a consistent look!

Installation Tips
Since this mid-support is of fixed length, be sure to install the end supports at the appropriate distance from the overhead shelf. Once the ends are secured, just thread the rod through the mid support before putting it in place. After the shelf is installed, simply slide the mid support to the desired location and secure it to the underside of the shelf with the provided screws... Done!

Here's what you get...
- 1 matte black fixed-length mid support
- 2 matching 3/4" screws
- 2 matching 1 1/8" screws