Satin Brass Oval Closet Rod

Desunia is pleased to offer this beautiful clothes rod, which will look great in any closet... especially yours!

Strength You Can Count On!
Don't be fooled by other choices that may appear to be the same, because all rods are not created equal! While the overall dimensions of most oval rods is 15mm x 30mm, the actual thickness of the steel can vary greatly. Ours is a robust 22 ga., far thicker than most others, so we know you'll be very pleased with its durability. Bring on those winter coats!

Classy finish
Chrome may be fine for your neighbor's closet, but the fact that you're reading this means you are looking for something much nicer. No question about it... satin brass is the epitome of class and elegance. The heavier steel that goes into our closet poles is the perfect foundation for a fantastic finish. Some manufacturers plate their goods as soon as they leave the steel mill. Not us! We make our rods and brackets "smooth as a baby's bottom" first, and THEN apply a generous brass plating! Then, each rod is carefully buffed with an abrasive wheel for a satiny smooth final finish. This last operation is done entirely by hand BTW.

End Brackets NOT Included
Remember, you are JUST ordering the rod ONLY. No end supports/brackets are included. The length you provide will be the length you get!

Cutting Pro Tip
Wrap the cut area with a few layers of painters' tape. Mark the length with a pencil, then use a square to draw a perpendicular cut line. If using an electric jigsaw, the tape will protect the rod from damage. If using a hand hacksaw, the blade will "dig into" the tape as you start the cut, preventing it from wandering. Once the cut is done, remove any burrs with a file or medium-grit sandpaper, and you're good to go!

Here's what you get...
- 1 Satin brass oval rod 36"